Rotor Screws Pair (VW)

OEM Number: N10648301 Manufacturer Number: N10648301

$4.64

 Select Vehicle to Check Fitment

In Stock

Free Shipping Over $50

Any TDI VW with disc brakes has these rotor screws that secure the rotor. ...

Read More...

Any TDI VW with disc brakes has these rotor screws that secure the rotor.

This is the new style screw that uses Torx, rather than the old Phillips-head screw that stripped easily.

If you know your existing screws are worn or if it has been many years since a brake replacement, it is a good idea to have an extra set on hand.

Brake rotor screws are sold in pairs.

OEM VW parts come from VW and are clearly marked with the VW logo and part number and/or boxed in VW boxes or bags. While IDParts.com sources many parts directly from manufacturers that supply VW, items marked as OEM VW are purchased from Volkswagen itself.
Audi
  • Q5 TDI w/ 3.0L V6 CPNB Engine (2014-2016)
Volkswagen
  • Beetle TDI w/ 2.0L CJAA Engine (2013-2014)
  • Beetle TDI w/ 2.0L CVCA Engine (2015)
  • Golf SportWagen TDI w/ 2.0L CRUA Engine (2015)
  • Golf TDI Mk6 w/ 2.0 CJAA Engine (2010-2014)
  • Golf TDI Mk7 w/ 2.0 CRUA Engine (2015)
  • Golf TDI MkIV (A4 chassis) w/ ALH Engine (1999-2003)
  • Golf TDI MkIV (A4 chassis) w/ BEW Engine (2004-2006)
  • Jetta TDI Mk6 w/ 2.0 CJAA Engine (2011-2014)
  • Jetta TDI MkIII (A3 chassis) w/ AHU Engine (1997-1999)
  • Jetta TDI MkIV (A4 chassis) w/ ALH Engine (1999-2003)
  • Jetta TDI MkIV (A4 chassis) w/ BEW Engine (2004-2005)
  • Jetta TDI MkV (A5 chassis) w/ 1.9 BRM Engine (2005-2006)
  • Jetta TDI MkV (A5 chassis) w/ 2.0 CBEA/CJAA Engine (2009-2010)
  • Jetta Wagon TDI (A4 chassis) w/ ALH Engine (2002-2003)
  • Jetta Wagon TDI (A4 chassis) w/ BEW Engine (2004-2006)
  • New Beetle TDI (A4 chassis) w/ ALH Engine (1998-2003)
  • New Beetle TDI (A4 chassis) w/ BEW Engine (2004-2006)
  • Passat TDI (B4 chassis) w/ AHU/1Z Engine (1996-1997)
  • Passat TDI (B5.5 chassis) w/ BHW Engine (2004-2005)
  • Passat TDI (NMS Chassis) w/ CKRA Engine (2012-2014)
  • Passat TDI (NMS Chassis) w/ CVCA Engine (2015)
  • Sportwagen TDI w/ 2.0L CBEA/CJAA Engine (2009-2014)

Frequently Asked Questions

These screws are a few threads longer than the factory ones. They will fit perfectly on a new hub, however, a hub on a vehicle usually has corrosion on exposed threads. Since the original screws were shorter, there is more exposed thread, which results in binding. The hole is open ended on the other side, so if you run a tap through the threads to clean them these screws will work 100% perfectly.
Ask us a question

What our customers say...

used these torx screws to replace older Phillips head units. The Torx superior when removing and last longer

Rated

I always replace the stock Phillips rotor screws with these. Way easier to get out when doing brake work.

Rated

I like to replace these bolts. Just so that next time they will come out easily.

Rated

They finally made a better design instead of philips. So far does not strip.

Rated

A must-have item when replacing rotors.

Rated

replace these when they get chewed up.

Rated
Shop by Category